Two sets of five tabbed dividers, multi colored and numbered for easy detection. Leading lines to each of the colored tabs make it easier to locate what is contained in that section and may be written on. Two sets of each color. Colors in set are red, orange, green, blue, and purple. Made from an extra thick 175 lb tag which is better than industry standard which is generally from 90 lb to 110 lb card stock.

This product provides a strong and rigid clear vinyl that allows for easy visibility of your stored and protected work orders, menus, product schedules and more. The stitched edges are designed for a longer product life and the convenient eyelet is great for places where paper work must be posted. It also doubles, and is great for, a reusable dry erase pocket.

The design is made with an overlapping fold over flap that is ideal not only for mailing but for an easy solution to 11"x17 " storage.

The 11x17 expanding filing folder is perfect for carrying CAD Drawings, Engineering Documents, Presentations, Artwork, & Business charts. Paper portfolios, best known for their practicality and durability, are ideal for storing and transporting your important documents. Gussets at the sides allow for expansions up to 2 inches. This product is also referred to as an Envelope, Wallet, or Portfolio.

A portrait style binder with hinges and rings on the 17" side, the 1" Angle-D ring allows for standard 3-hole punching equipment and is mounted to the back panel. Made from sturdy .055 gage polyethylene, works great out in the field or in an office setting.

The screwpost binder features a full fold over hinge design, and thick panels. This product is ideally used for corporate presentations and record-keeping.

This clipboard is made from an extra thick 3/16" Acrylic plastic. The board edges are bull-nosed and corner rounded to remove sharp edges. Classic 6" clip riveted to the center of the 11" side with a handy hanging hole manufactured on the clip. Made extra long for very smooth and easy writing when at the bottom of the page.

This is a peel and stick label that allows labeling in the hard to find size of 11" x 17". It is as easy as putting the pages in a laser printer made to print 11" x 17" sheets. Available in many fluorescent colors.

Our .5" Binding Combs come in a variety of colors to mix and match perfectly with our various report covers (sold separately). The 11 5/8" Length is perfect to finish off the presentations with. Available in Black, Blue, Forest Green, Maroon, Red, and White.

Economical and environmentally friendly alternative to document storage and use. Excellent moisture-resistance with the coated press guard cover. Spring action clip features a locking mechanism to securely hold documents.

Heavy-Duty Vinyl Sheet Protector for protecting your documents. We use a thick rigid vinyl sheet sealed on 3 edges to produce a superior product. The insertion edge is along the shorter 8.5" side near the three holes. The protectors are not Archivable so there is a posibility of ink transfer onto the protector.

A landscape style binder with hinges and rings on the 13" side, the 1" Angle-D ring allows for standard 3-Hole punching equipment and is mounted to the back panel. Made from sturdy .055 gage polyethylene, works great out in the field or in an office setting.

This 2" post binder makes a great storage product. The latch secured closure competently holds up to 2 inches of 11x17 paper. The clear overlay allows users to clearly identify contents. This is a one of a kind product only found here.

This storage box was made to specifications for most of our 11x17 binders. This is a great product because, if you were using the binders, then you could still use the box to store your 11x17 paper and/or tabs. Will store up to two 1" Ring Binders.

This storage box was made to specifications for most of our 11x17 binders. It can hold 1.5" poly or vinyl binders. This is a great product because, if you were using the binders, then you could still use the box to store your 11x17 paper and/or tabs. Will store up to two 1.5" Ring Binders.

Liquidated Cases of 2" Angle-D Vinyl Binders, with the rings are mounted on the Back panel to allow papers to lie flat. The Heavy Duty Ring keeps pages securely in place. Angle-D ring holds more than standard round ring. Heavy Duty Durable vinyl cover protects contents.

Heavy-Duty Vinyl Sheet Protector for protecting your documents. We use a thick rigid vinyl sheet sealed on 3 edges to produce a superior product. The insertion edge is along the shorter 8.5" side near the three holes. The protectors are not Archivable so there is a posibility of ink transfer onto the protector.

This Heavy Duty Vinyl Sheet Protector is Non-Archivable. The protectors are not only a Heavy-Duty Thickness, the holes are reinforced for even extra durability. Insertion is on the smaller 11.7" (297mm) side and is specially designed to allow easier insertion of pages. These details are for maximum protection while keeping your contents secure.

Allows larger pages to be easily inserted or removed from the clear overlay pockets. Easily customize Front Cover, Spine, and Back Panel with our heavy duty clear vinyl overlay pockets. The heavy duty Angle-D rings are mounted on the back panel to allow papers to lie flat and securely in place, while allowing more than standard round ring.

Made from durable hardboard this clipboard is perfect to hold your drawings or plans in an unstable environment. Hardboard has been sprayed with a polyurethane coating to insure longevity and create a smooth writing surface. Clipboard has an 8" Hinge Clip mounted along the 17" side and 2 smaller mouse trap hinge clips mounted along each of the 11" sides.

Our design allows larger pages to be easily inserted or removed from the clear overlay pockets. Clear overlay allows easy customization of Front Cover, Spine, and Back Panel. The rings are mounted on the Back panel to allow papers to lie flat. The Heavy Duty Ring keeps pages securely in place. Angle-D ring holds more than standard round ring. Heavy Duty Durable vinyl cover protects contents.

This Heavy Duty Vinyl Sheet Protector is Non-Archivable. The protectors are not only a Heavy-Duty Thickness the holes are reinforced for even extra durability. Insertion is on the smaller 13" side and is specially designed to allow easier insertion of pages. These details are for maximum protection while keeping your contents secure.

A nice approach to landscape letter size use and storage, this product comes with clear overlay pockets on the front, spine, and back allowing for easy customization. It also comes with Slant-D ring, that holds more than standard round ring and it is mounted on the back panel to allow papers to lie flat. Binder has inside pockets on the covers for quick access to documents.

This is a peel and stick label that allows labeling in the hard to find size of 11" x 17". It is as easy as putting the pages in a laser printer made to print 11" x 17" sheets. Available in Silver and Gold Metallic Sheets.

This product is made from a thick 3/16" Acrylic plastic, the board edges are bull-nosed and the corners rounded to remove sharp edges. The clipboard features a hinge clip riveted to the center of the 11" side and features a retractable hanging bracket. Extra long for very smooth and easy writing when at the bottom of the page.

Solid color design from Pressguard® Fiberboard Spine tabs are perfect for quick and easy categorization of your Pressboard or Screw Post Binders. Available in packages of Executive Red, White, Pastel Green, and Yellow; purchase multiple colors for easier sorting. The 5 tab design is along the 11" side and when added to the binder will extend beyond the spine for labeling. Use our 5 Tab Index Divider Labels (#152 Sold Separately) to add quick professionalism to all your data binders.

Our 1" Binding Combs come in a variety of colors to mix and match perfectly with our various report covers (sold separately). The 11 5/8" Length is perfect to finish off the presentations with. Available in Black, Blue, Forest Green, Maroon, Red, and White.

The report covers that we offer come in many colors for a variety of choices when personalizing your work. Our report covers are growing in popularity as well. This is due to the simplicity and the thick plastic properties that allow the covers to withstand a lot of wear and tear. Our transparent PCV report covers are typically used in GBC® comb binding and ECT® Coil binding, but are also great for use with any wire binding, Velobind, ProClick, or ZipBind binding.

The finest materials are used in the manufacturing of our 11x17 metal picture frames.This frame is made with a clear front and a corrugated back. A beautiful rich black color, made with a strong metal material for a smooth crisp finish. When the product is viewed the high quality frame is sure to delight any person who thinks that a picture can be well complemented by the perfect frame.

Crafted right here in the USA from start to finish. Only quality hardwoods and the finest stains were used for this frame. We're proud that this product was manufactured in the United States. This frame is sure to bring a feel of comfort, strength and grace to any room in your office or home.

This is a White Arch Clip Clipboard that is made from an extra thick 3/16" Acrylic plastic. The Arch Clip is mounted on the 11" side and is very ideal for applications and surveys offering the function of a clipboard and the capabilities of ring binding. Our dedication to having the best and most unique products has only gotten better when it comes to a clipboard such as this one.

This product is made from a thick 3/16" Acrylic plastic. The board edges are corner rounded and bullnosed to remove sharp edges. Comes with two drilled hanging holes in each side of the clip. The Jumbo Hinge clip is riveted to the center of the 17" side. Made extra long for very smooth and easy writing when at the bottom of the page.

This 4" post binder makes a great storage product. The latch secured closure competently holds up to 4 inches of 11x17 paper. The clear overlay allows users to clearly identify contents. This is a one of a kind product only found here.

A five tabbed set of white dividers that comes with ten sets of five; tabs and hole punches on the 11" side. Made from an extra thick 175 lb tag,which is better than industry standard which is generally from 90 lb to 110 lb card stock. The Tab Divider Labels (#152) that are sold separately are a great way to make these tabs look very clean and professional.

A eight tabbed set of white dividers that comes with two sets of eight tabs and holes punched on the 11" side. Made from an extra thick 175 lb tag,which is better than industry standard which is generally from 90 lb to 110 lb card stock. The Tab Divider Labels (#152100) that are sold separately are a great way to make these tabs look very clean and professional.

A twelve tabbed set of white dividers that comes with 2 sets of twelve tabs and hole punched on the 11" side. Made from an extra thick 175 lb tag,which is better than industry standard which is generally from 90 lb to 110 lb card stock.

This is one set of twelve tabbed dividers numbered one through twelve. Made from an extra thick 175 lb tag which is better than industry standard which is generally from 90 lb to 110 lb card stock.

Eight sets of six white tabbed dividers that come tabbed on the 17" side. Made from an extra thick 175 lb tag. Better than industry standards which are generally made from 90 lb to 110 lb card stock.

Storage and mailing solutions: Resists tearing, puncturing, and water damages. Virtually indestructable Tyvek materials. Outside dimensions: 13" x19"

Great for organizing schematics and diagrams for technical training classes. Protects the documents when in the shop, classroom or field.

Economical and environmentally friendly alternative to document storage and use. Excellent moisture-resistance with the coated press guard cover. Spring action clip features a locking mechanism to securely hold documents.

This product is made from a thick Acrylic Plastic and has standard 3-hole punched ring spacing. The non-flexible smooth panels keep a rigid and sturdy surface. The stunning binder requires screw post extensions if more than 5/16" screw post is needed. Picture is shown with 1" Extension. This item is not included, and can be purchased separately.

The rings are mounted on the Back panel to allow papers to lie flat. The Heavy Duty Ring keeps pages securely in place. Heavy Duty Durable Acrylic cover protects contents. Ring Spacing allows users to easily punch their holes. This product can be manufactured in different colors, call for details.

This product is made from a thick 3/16" Acrylic plastic. The board edges are corner rounded and bull-nosed to remove sharp edges. The board also comes with two drilled hanging holes in each side of the clip and Jumbo Hinge clip is riveted to the center of the 18" side. Made extra long for very smooth and easy writing when at the bottom of the page.

Made from a durable, flexible polyethylene, with the .5" round ring is riveted to the spine. Standard 3-hole punch ring spacing allows the user to use standard hole punching equipment, and also allows the user's drawings to be used in many other applications.

Made from a durable, flexible polyethylene this lightweight material goes just about anywhere. This binder's covers are made to last. Perfect for presentations on the run. The 1.5" Angle-D ring is riveted to the back panel and has standard 3-hole punch ring spacing which allows the user to use standard hole punching equipment.

European A4 Size Vinyl View Binders have clear vinyl overlay pockets on the front, back, and spine. It has a 3" Angle-D Ring mounted to the back panel to allow the documents to lie flat when opened. Utilizes European 4-Hole Punching.

This 11x17 Binder really is a unique product. This binder is ideal for Presentations, controlled environments, and archiving projects. Binder panels are made from an Extra-Thick Acrylic Plastic. The non-flexible smooth panels keep a rigid and sturdy surface. The flat spine is made from the same material as the panels. There is a 2" nickel finished Slant-D Locking EZ Touch Ring, riveted to the back panel. The Slant-D Ring holds 25% more paper than a regular round ring. The EZ Touch® Locking Ring securely holds paper while preventing pinched fingers. This binder is hinged on the 11" Side, with continuous aluminum piano hinges that are riveted to both panels and the spine.

A great storage solution. Zipper track keeps out dirt and moisture; acid free and archival safe. Made from all virgin polyethylene film. Outside Dimensions are 12" x 18".

This product is made from a durable, flexible polyethylene. Made to last but light and flexible enough to use for travel. Perfect for presentations or on the run. Fastening system stores documents securely with its two metal prongs, the slide bar locks will keep the prongs from unfolding during use or storage. Use with standard 3-hole punched paper. Allows the user's drawings to be used in many other applications as well.

This product is made from a durable, flexible polyethylene. Light weight material goes just about anywhere. This binder's covers are made to last, but they're light and flexible enough to use for travel. Perfect for presentations on the run.

Sheet lifters for letter size (11” x 8.5”) 3-ring binders. Use with standard 3-hole spacing on 11” side. Packaged 10 units per package. Suggested to use with round ring binders.

The design is made with an overlapping fold over flap that is ideal not only for mailing but for an easy solution to 11"x17" storage.

This product can be used in many ways for storage and organizing. You can use it with our 11x17 Box Mailer for storage and even our Hanging File Folders for great organization, which go with any of our 11x17 paper products.

This is a very sturdy and durable item. Any user would like the convenience of a side loader tray but would love the capability of stacking for better organization. There are also rubber feet to protect any desktop form scratches.

The finest materials are used in the manufacturing of our 11x17 metal picture frames. This frame is made with a clear glass front and hard backing. A beautiful dark black color made with a strong plastic for easy hangability. When the product is viewed the high quality frame is sure to delight any person who thinks that a picture can be well complemented by the perfect frame.

This is a durable and stout flat mailer with tabbed ears for a self-seal. This mailer will never need a stiffener because it's already made strong for prevention of bending and crushing during shipping. Very ideal to ship your photos, diplomas, artwork and any type of documents in this type of mailer for a safe and cost sufficient shipment.

Our Filing Folders are a great add-on to any of your organizing needs. We have the 11x17 Hanging File Folders (ESSEL-4158) that can be used with these to double up on the organization. Our Rolling File Cart (FELLO-45081) and the 11x17 File Storage Box (#561003) are a few ways to store these folders effectively. We also carry an 11x17 Portfolio Case (#566680) that works well with these File Folders to organize your documents or art work while still allowing for great portability. Made from 11 pt./175 lb. index

Two sets of five tabbed dividers, multi-colored for easy detection. Two sets of each color. Colors included are red, clear/white, blue, yellow and green. Made from an extra thick 175 lb tag, which is better than industry standard which is made from 90 lb to 110 lb card stock.

This product is made from a thick 1/8" Hardboard coated in polyurethane spray for extra resistance to damage. There is a classic 6" clip riveted to the center of the 11" side with a hanging hole made on the clip. Made extra long for very smooth and easy writing when at the bottom of the page.

Riveted to the board is a high tension serrated clip that can hold up to 75 sheets of 24lb paper. There is also a built in hanging hole for easy storability.

The durable high capacity clip holds up to 1" of paper securely. There are also two storage compartments offering a total of 1.5" capacity and a pen/pencil holder.

This product is made from a thick 1/8" Hardboard coated in polyurethane spray for extra resistance to damage. There is a classic 6" clip riveted to the center of the 17"side with a hanging hole made on the clip. This clipboard is made extra long for very smooth and easy writing when at the bottom of the page.

This Polypropylene Sheet Protector is Archivable for the prevention of ink transfer onto the protector. The protectors are not only a Heavy-Duty Thickness the holes are reinforced for even extra durability. Insertion is on the smaller 11" side and is specially designed to allow easier insertion of pages. These details are for maximum protection while keeping your contents secure.

The binder features a RF Sealed hinge into 2 layers of vinyl over thick chipboard. Heavy Duty Durable vinyl cover protects contents. It has extra long panels for product accessories and a 2" round ring riveted to the back panel for a standard 3-hole punch.

This product is made from a thick 1/8" Hardboard. There is a 2" nickel finished Angle-D Ring riveted to the back panel and continuous aluminum piano hinges. Standard 3-hole punch ring spacing allows the user to use standard hole punching equipment.

This Polypropylene Sheet Protector is Archivable for the prevention of ink transfer onto the protector. The protectors are not only a Heavy-Duty Thickness the holes are reinforced for even extra durability. Insertion is on the smaller 11" side and is specially designed to allow easier insertion of pages. These details are for maximum protection while keeping your contents secure.

This lamination pouch will preserve your 8.5" x 14" {Legal Size} documents, art, or menus. They are clear for the best picture quality and over sized so they will efficiently seal around the edges. A pouch lamination machine will be needed for sealing because they are not self-adhesive.

This product is made from a durable, flexible polyethylene. Lightweight material goes just about anywhere. This binder's covers are made to last, but they're light and flexible enough to use for travel. Perfect for presentations on the run. The 2" round ring is riveted to the spine on the 8-1/2" side. Ring spacing is 2-3/4" from center to center.

This product is made from a durable, flexible polyethylene. Lightweight material goes just about anywhere. This binder's covers are made to last, but they're light and flexible enough to use for travel. Perfect for presentations on the run. The 1" round ring is riveted to the spine on the 14" side and has standard 3-hole spacing.

This product is made from a thick 1/8" Hardboard coated in polyurethane spray for extra resistance to damage. There is a low profile clip with two rubber traction grips and a retractable hanging hole attached. This clipboard is made extra long for very smooth and easy writing when at the bottom of the page.

This is a four tabbed set of white dividers that comes with five sets of four. Our tabs are made from an extra thick 175 lb tag. This is better than industry standard which is from 90 lb to 110 lb card stock. The Tab Divider Labels {sold separately} are a great way to make these tabs look very clean and professional

Perfect for presentations that you want to make an impact at! Our top of the line Acrylic Binders look fabulous and they are very functional too. Made with Continuous Aluminum Piano Hinges to allow greater flexibility when opening and closing while remaining stable, 2" Angle-D 3 Ring mounted on 13" side which utilizes standard 3-hole punch equipment.

This is a five tabbed set of white dividers that comes with ten sets of five on the 13" side. Our tabs are made from an extra thick 175 lb tag. This is better than industry standard which is from 90 lb to 110 lb card stock. The Tab Divider Labels that are sold separately are a great way to make these tabs look very clean and professional.

Heavy-Duty Vinyl Sheet Protector for protecting your documents. We use a thick rigid vinyl sheet sealed on 3 edges to produce a superior product. The insertion edge is along the shorter 8.5" side near the three holes. The protectors are not Archivable so there is a possibility of ink transfer onto the protector.

This product is made from a thick Acrylic Plastic and has standard 3-hole punched ring spacing. The non-flexible smooth panels keep a rigid and sturdy surface. The stunning binder requires screw post extensions if more than 5/16" screw post is needed. Shown pictured with 1" Extension, item is not included, and can be purchased separately.

Known for its superior quality and performance, it delivers the look of a more expensive text and cover sheet without the related high costs. It has a smooth white surface that keeps colors rich, images vivid and dot gain to a minimum, so your images stay crisp and sharp. Now with 10% post-consumer content. Paper size may vary by +/- .04"

Known for its superior quality and performance, it delivers the look of a more expensive text and cover sheet without the related high costs. It has a smooth white surface that keeps colors rich, images vivid and dot gain to a minimum, so your images stay crisp and sharp. Now with 10% post-consumer content.

A4 size White Copy Paper is perfect for everyday use and presentations. Smooth white surface that keeps colors rich, images vivid and dot gain to a minimum, so your images stay crisp and sharp. Now with 10% post-consumer content, it helps the environment as well.

Full Case of Manufactured Seconds 11x17 Fiberboard Report Covers (4 packs of 10 per case) Sold As Is, no refunds or exchanges will be made. Whole Case Only.

The 3" EZ Locking Angle-D ring binder features a QUAD-Creased hinge design, thick panels, and a superior quality ring mechanism. This product is ideally used for corporate presentations and record-keeping.

This product comes with clear overlay pockets for easy organization and presentations. The .5" round ring is riveted to the spine and is used with any standard 3-hole punching equipment. A great way to store or present your 11"x8.5" (Letter) size documents.

A Great Binder to store your letter size (11" x 8.5") documents in. It has standard hole punch 3-ring spacing with rings riveted to spine. Front, spine, and back covers have clear overlay pockets to display and customize your binder. Inside pockets are also a handy feature to place those items that you will need to have quick access to.

A nice approach to letter size use and storage, this product comes with clear overlay pockets on the front, back, and spine; allowing for easy; customization. The Slant-D ring holds more than standard round ring; and is mounted on the back panel to allow papers to lie flat. Available in Black or White. Binder has inside pockets inside front and back covers for storing those documents quickly.

A nice approach to letter size use and storage, this product comes with clear overlay pockets on the front, back, and spine; allowing for easy; customization. The Round ring is mounted on the spine panel. Available in Black or White. Binder has inside pockets inside front and back covers for storing those documents quickly.

A nice approach to letter size use and storage, this product comes with clear overlay pockets on the front, back, and spine; allowing for easy; customization. The Slant-D ring holds more than standard round ring; and is mounted on the back panel to allow papers to lie flat. Available in Black or White. Binder has inside pockets inside front and back covers for storing those documents quickly.

A nice approach to letter size use and storage, this product comes with clear overlay pockets on the front, back, and spine; allowing for easy; customization. The Round ring is mounted on the spine panel. Available in Black or White. Binder has inside pockets inside front and back covers for storing those documents quickly.

A nice approach to letter size use and storage, this product comes with clear overlay pockets on the front, spine, and back allowing for easy customization. It also comes with Slant-D ring, that holds more than standard round ring and it is mounted on the back panel to allow papers to lie flat. Binder has inside pockets on the covers for quick access to documents.

A nice approach to letter size use and storage this product comes with clear overlay pockets on the front, spine, and back allowing for easy customization. It also comes with Slant-D ring, that holds more than standard round ring and is mounted on the back panel to allow papers to lie flat. Binder has quick access pockets inside the front and back panels.

A nice approach to letter size use and storage, this product comes with clear overlay pockets on the front, back, and spine; allowing for easy; customization. The Slant-D ring holds more than standard round ring; and is mounted on the back panel to allow papers to lie flat. Available in Black or White. Binder has inside pockets inside front and back covers for storing those documents quickly.

This binder is Vinyl Sealed and features clear overlaying outside pockets for full sheet insertions. The 2-3/4" spaced 3 rings are mounted on the 8-1/2" side to provide landscape viewing of your documents. The Straight-D ring used is nickel plated and confidently stores your loose leaf paper.

This binder is Vinyl Sealed and features clear overlay outside pockets for full sheet insertions. The 2-3/4" spaced 3 rings are mounted on the 8-1/2" side to provide landscape viewing of your documents. The Angle-D ring used is nickel plated and confidently stores your loose leaf paper. The black vinyl is extra thick and has a lower freezing point that most vinyl products.

Our legal size clipboard is great for holding all your legal size {8.5"x14"} documents and also allows extra room at the bottom to allow you to write smoothly. The low profile clip is centered and riveted to the 8.5" side and has two rubber grips and a retractable hanging bracket for convenience. Board corners are rounded and bullnosed to remove sharp edges.

We utilize some of the industry standards of A3 binding: the 4 ring mechanism is standard for European 4 hole drilled paper, and our ring mechanism is centered on the 11.7" (297mm) side. But what makes this product stand out from the rest, is the higher than industry standards and quality materials used to produce this binder. The heavy-duty Angle-D ring allows for a greater paper capacity than a standard round ring does, also your paper will lay flat against the back panel reducing the risk of damaging your documents. We are also using our Extra Thick chipboard material, and sealing these panels with the same premium quality vinyl that you find in our 11x17 Binders.

A great new product. This 13x19 Clipboard features a locking hinge style clip. The Acrylic plastic board is extra thick and rugged to allow for handling and use while walking or standing. The extra large heavy duty clip is sure to hold your drawings.

This 19x13 Clipboard features a locking hinge style clip. The Acrylic plastic board is extra thick and rugged to allow for handling and use while walking or standing. The extra large heavy duty clip is sure to hold your drawings. A clipboard is a portable, rigid surface that holds papers together by means of a clip attached at the top of a thin board. Clipboards are a convenient way to record information while standing, walking from site to site, or recording data when it is not possible to sit down at a desk. There are a variety of professionals who rely on clipboards from day to day, including surveyors, managers, secretaries, coaches, and more.

This Heavy Duty Vinyl Sheet Protector is Non-Archivable. The protectors are not only a Heavy-Duty Thickness the holes are reinforced for even extra durability. Insertion is on the smaller 11" side and is specially designed to allow easier insertion of pages. These details are for maximum protection while keeping your contents secure.

This is a four tabbed set of Multi-Colored Index dividers that comes with five sets of four. Our tabs are made from an extra thick 175 lb tag. This is better than industry standard which is from 90 lb to 110 lb card stock.

his product is made from a thick 3/16" Acrylic plastic.The board edges are corner rounded and bull-nosed to remove sharp edges. The board also comes with two drilled hanging holes in each side of the clip. The Jumbo Hinge clip is riveted to the center of the 24" side. Also, this clipboard is made extra long for very smooth and easy writing when at the bottom of the page.

This is a light weight but very tough clear vinyl peel and stick sheet holder that affixes to folders, binders, report covers, and any place you need to store paper. They are great for not only business projects but for personal projects as well. Excellent for keeping your 11x17 documents secure and tight

This storage box was made to specifications for most of our 11x17 binders. It can hold up to four of our 1" poly or vinyl binders and up to two of our 2" poly or vinyl binders. This is a great product because, if you were using the binders, then you could still use the box to store your 11x17 paper and/or tabs.

An inexpensive alternative to display artwork or drawings. Great for formal presentations placed on an office wall. Made from plastic, this frame has a clear front and a cardboard backing, both lightweight and looks great.

Peel and stick business card size (2” x 3.5”) pocket. 20 units per package. Suggested uses: • Spine pocket for 2” ring 11x17® Binders • Also great for identifying • Binders • Clipboards • Portfolios • Filing Cabinets • Boxes • Report Covers

This Heavy Duty Vinyl Sheet Protector is Non-Archivable. The protectors are not only a Heavy-Duty Thickness the holes are reinforced for even extra durability. Insertion is on the smaller 11" side and is specially designed to allow easier insertion of pages. These details are for maximum protection while keeping your contents secure. If you will use tab dividers with this product, please take care to order the Extra Long Tab Dividers, to ensure that they will be visible.

This clear cello-style resealable poly envelope is a great storage solution and can be re-opened and closed as necessary. It has a peel off strip that folds over with ease and it resists moisture and grease. Outside dimensions are 12"x18" with 1.5 mil thickness.

Heavy Duty Durable Vinyl that is considered to be Premium Quality and an updated Ring Mechanism. The EZ Touch Ring is a single lever spring action locking ring, as the name suggest its eazy to open and shouldn't pinch fingers when closing. Higher Quality Extra Thick chipboard and with clear overlay outside pockets for full sheet insertion.

Made from a durable, flexible polyethylene that is lightweight and goes just about anywhere. This binder's covers are light and flexible enough to use for travel, perfect for presentations on the run. The 2" Angle-D ring is riveted to the back panel, with standard 3-hole spacing allowing the user to use standard hole punching equipment.

Our design allows larger pages to be easily inserted or removed from the clear overlay pockets. Clear overlay allows easy customization of Front Cover, Spine, & Back Panel. The heavy duty Angle-D rings are mounted on the Back panel to allow papers to lie flat and keep documents securely in place.

Made from Pressguard® Fiberboard material for a very durable and long lasting binder. Has a wide variety of ways it can be used.

Vinyl Sheet Protectors are made with a Heavy-Duty thickness and the holes are reinforced for even extra durability. The thickness of our vinyl protectors are uncomparable to a poly sheet protector. Insertion is on the larger 8.5" side and is specially designed to allow easier insertion of pages. These details are for maximum protection while keeping your contents secure. The protectors are not Archivable so there is a possibility of ink transfer onto the protector.

Allows larger pages to be easily inserted or removed from the clear overlay pockets. Easily customize Front Cover, Spine, and Back Panel with our heavy duty clear vinyl overlay pockets. The heavy duty Angle-D rings are mounted on the back panel to allow papers to lie flat and securely in place, while allowing more than standard round ring.

Made from a durable, flexible polyethylene, this binder's covers are made to last, but are light and flexible enough to use for travel. Fastening system stores documents securely with its two metal prongs and the slide bar locks will keep the prongs from unfolding during use or storage. Standard 3-hole punch equipment allows the user's drawings to be used in many other applications as well.

Our Design allows larger pages to be easily inserted or removed from the clear overlay pockets. Clear overlay allows easy customization of Front Cover, Spine & Back Panel. The rings are mounted on the Back panel to allow papers to lie flat. The Heavy Duty Ring keeps pages securely in place. Slant D-ring holds more than standard round ring. Heavy Duty Durable vinyl cover protects contents.

This is a clear waterproof peel and stick label that allows labeling in the hard to find size of 11" x 17". It is as easy as putting the pages in a laser printer made to print 11" x 17" sheets. Printable poly paper great for underwater use.

This is a Wall Pocket that holds 11" x 17" paper with a maximum paper length of 20-3/4. It can be used in conjunction with all of our folders and even our 17x11 tab dividers for use as an organizer as well as for storage. Shipped completely assembled with pre-drilled holes and the screws for easy hanging

Crafted right here in the USA from start to finish. Only quality hardwoods and the finest stains were used for this frame. We're proud that this product was manufactured in the United States. This frame is sure to bring a feel of comfort, strength and grace to any room in your office or home.

The finest materials are used in the manufacturing of our 11x17 metal picture frames. Each frame is made with a clear front and a corrugated back. A beautiful Cherry Wood look made with a strong metal material for a smooth crisp finish. When the product is viewed the high quality frame is sure to delight any person who thinks that a picture can be well complemented by the perfect frame.

The report covers that we offer come in many colors for a variety of choices when personalizing your work. Our report covers are growing in popularity as well. This is due to the simplicity and the thick plastic properties that allow the covers to withstand a lot of wear and tear. Our pressguard report covers are typically used in GBC® comb binding ECT® coil binding and but are also great for use with any wire binding, Velobind, ProClick, or ZipBind binding.

An eight tabbed set of white dividers that comes with one set of eight tabs with holes punched on the 11" side. Made from an extra thick 175 lb tag,which is better than industry standard which is generally from 90 lb to 110 lb card stock. The Tab Divider Labels (#152100) that are sold separately are a great way to make these tabs look very clean and professional.

A twelve tabbed set of white dividers that comes with 1 set of twelve tabs and hole punched on the 11" side. Made from an extra thick 175 lb tag,which is better than industry standard which is generally from 90 lb to 110 lb card stock.

A nice approach to landscape letter size use and storage, this product comes with clear overlay pockets on the front, spine, and back allowing for easy customization. It also comes with Straight-D ring, that holds more than standard round ring and it is mounted on the back panel to allow papers to lie flat. Binder has inside pockets on the covers for quick access to documents.

We are utilize some of the industry standards of A3 binding: the 3 ring mechanism is used with standard hole punching equipment and our ring mechanism is centered on the 11.7" (297mm) side. But what makes this product stand out from the rest, is the higher than industry standards and quality materials used to produce this binder. The heavy-duty Angle-D ring allows for a greater paper capacity than a standard round ring does, also your paper will lay flat against the back panel reducing the risk of damaging your documents. We are also using our Extra Thick chipboard material, and sealing these panels with the same premium quality vinyl that you find in our 11x17 Binders.

This product is made from a thick 1/8" Hardboard coated in polyurethane spray for extra resistance to damage. Low profile clip riveted to the center of the 11" side with a hanging hole made on the clip. Made extra long for very smooth and easy writing when at the bottom of the page.

This product is made from a thick 1/8" Hardboard coated in polyurethane spray for extra resistance to damage. There is a 8" Hinge Clip riveted to the center of the 11" side. Made extra long for very smooth and easy writing when at the bottom of the page.

Our Filing Folders are a great add-on to any of your organizing needs. We have the 11x17 Hanging File Folders (ESSEL-4158) that can be used with these to double up on the organization. Our Rolling File Cart (FELLO-45081) and the 11x17 File Storage Box (#561003) are a few ways to store these folders effectively. We also carry an 11x17 Portfolio Case (#566680) that works well with these File Folders to organize your documents or art work while still allowing for great portability. Made from 11 pt./175 lb. index

Go to www.xerox.com and search for approved printers.This product comes with 100 11" x 17" clear Transparencies with removable strips for printing. There are a few things to remember when printing transparencies. The first would be to fan all striped edges before loading. Also, for best results run one at a time by selecting one copy each time you print. Tip: to prevent static charge by stacking, remove each transparency as it exits the printer. ***Only recommended for use on laser printers.***

CUSTOM 18"x24" Black Pressboard Binder plus 1" Flap-Rounded Corners-No Hole Punches-No fastener-Front & Back Panel

This product is made from a thick 3/16" Acrylic plastic, the board edges are bull-nosed and the corners rounded to remove sharp edges.

BLOWOUT Cases of economical and environmentally friendly alternative to document storage and use. Excellent moisture-resistance with the coated press guard cover. Spring action clip features a locking mechanism to securely hold documents.

This lamination pouch will preserve your 8.5" x 14" {Legal Size} documents, art, or menus. They are clear for the best picture quality and over sized so they will efficiently seal around the edges. A pouch lamination machine will be needed for sealing because they are not self-adhesive.

This 11x17 Binder really is a unique product. This binder is ideal for Presentations, controlled environments, and archiving projects. Binder panels are made from an Extra-Thick Acrylic Plastic. The non-flexible smooth panels keep a rigid and sturdy surface. The flat spine is made from the same material as the panels. There is a 3" nickel finished Slant-D Ring, riveted to the back panel. The Slant-D Ring holds 25% more paper than a regular round ring. This binder is hinged on the 11" Side, with continuous aluminum piano hinges that are riveted to both panels and the spine.

Go to www.xerox.com and search for approved printers.This product comes with 100 11" x 17" clear Transparencies with removable strips for printing. There are a few things to remember when printing transparencies. The first would be to fan all striped edges before loading. Also, for best results run one at a time by selecting one copy each time you print. Tip: to prevent static charge by stacking, remove each transparency as it exits the printer. ***Only recommended for use on laser printers.***

This storage box was made to specifications for most of our 11x17 binders. Will store up to two 3" Ring Binders. This is a great product because, if you were using the binders, then you could still use the box to store your 11x17 paper and/or tabs.

Made from a durable, flexible polyethylene, with the .5" round ring is riveted to the spine. Standard 3-hole punch ring spacing allows the user to use standard hole punching equipment, and also allows the user's drawings to be used in many other applications.

Our Filing Folders are a great add-on to any of your organizing needs. We have the 11x17 Hanging File Folders (ESSEL-4158) that can be used with these to double up on the organization. Our Rolling File Cart (FELLO-45081) and the 11x17 File Storage Box (#561003) are a few ways to store these folders effectively. We also carry an 11x17 Portfolio Case (#566680) that works well with these File Folders to organize your documents or art work while still allowing for great portability.

A portrait style binder with hinges and rings on the 17" side, the 2" Angle-D ring allows for standard 3-Hole punching equipment and is mounted to the back panel. Made from sturdy .055 gage polyethylene, works great out in the field or in an office setting.

Riveted to the board is a low profile clip. There is also a built in hanging hole for easy storability.

This is a peel and stick label that allows labeling in the hard to find size of 11" x 17". It is as easy as putting the pages in a laser printer made to print 11" x 17" sheets. Available in white.

A five tabbed set of white dividers that comes with 1 set of five tabs and hole punches on the 11" side. Made from an extra thick 175 lb tag,which is better than industry standard which is generally from 90 lb to 110 lb card stock. The Tab Divider Labels (#152) that are sold separately are a great way to make these tabs look very clean and professional.

There is no match for the amazing capability to turn a simple and mostly written on tab into a very clean and professional working tool. When ordered simply go to www.avery.com and download a template to make your custom tab then print out on any ink jet or laser printer. Recommended for use with our 1/8 cut tab dividers.

The 2" Angle-D ring binder features a QUAD-Creased hinge design, thick panels, and a superior quality ring mechanism. This product is ideally used for corporate presentations and record-keeping.

The rings are mounted on the Back panel to allow papers to lie flat. The Heavy Duty Ring keeps pages securely in place. Angle-D ring holds more than standard round ring. Heavy Duty Durable vinyl cover protects contents.

Peel and stick pocket for 1” ring, binder spines. 20 units per package.

The finest materials are used in the manufacturing of our 11x17 metal picture frames. Each frame is made with a clear front and a cardboard back. A beautiful silver color made with a strong metal material for a smooth crisp finish. When the product is viewed the high quality frame is sure to delight any person who thinks that a picture can be well complemented by the perfect frame.

If you're looking for a Heavy Duty sheet holding component, then you've found it. This product is designed to provide the best protection that you can receive from a sheet holder. The Velcro tabs that come with this product are perfect for putting your document wherever it is needed and keeping it there. It is made for easy flow of paper and is rigid enough to cut for whatever job is needed

Full Case of Manufactured Seconds 11x17 Poly Report Covers (4 packs of 6 per case) Sold As Is, no refunds or exchanges will be made. Whole Case Only.

The Jumbo Hinge clip is riveted to the center of the 17" side. Also, this clipboard is made extra long for very smooth and easy writing when at the bottom of the page and a privacy cover that can conceal all of the user's work.

This storage box was made to specifications for most 11x17 products. It will hold not only 11x17 paper products, it will even hold up to 4 of our 1/2" and two of our 1" poly binders very securely and safely. Regrettably, this box isn't designed for our classic vinyl binders. See our Binder Storage Box for those products.

Two banks of white, twelve tabbed dividers lettered A-Z with a total of twenty four tabs. Made from an extra thick 175 lb tag. Better than industry standards which are generally made from 90 lb to 110 lb card stock.

Our 60 pt. Chipboard is great quality and is rigid and sturdy for all your projects. Our chipboard measures 1/16" thick and comes pre-cut to 11" x 17" in size.

Our Design allows larger pages to be easily inserted or removed from the clear overlay pockets. Clear overlay allows easy customization of Front Cover, Spine, and Back Panel. The rings are mounted on the Back panel to allow papers to lie flat. The Heavy Duty Ring keeps pages securely in place. Angle-D ring holds more than standard round ring. Heavy Duty Durable vinyl cover protects contents.

Made from a durable, flexible, and lightweight polyethylene. The binder's covers are made to last, and are durable enough to use when traveling. The 1" round ring is riveted to the spine, with standard 3-hole punch ring spacing; allows the user to use standard hole punching equipment.

Riveted to the board is a jumbo hinge clip.

Great product for 3D Sketching, used by Artists, Engineers, and CAD Drafting. Tablet of 50 sheets of Isometric Grid Paper. Rules are on 30° angles with 1/4" increments. Lines are drawn in Fade-Out Blue Ink and should disappear when copying on most copiers*. *Copy intensity may vary with copier manufacturers.

Our Filing Folders are a great add-on to any of your organizing needs. We have the 11x17 Hanging File Folders (ESSEL-4158) that can be used with these to double up on the organization. Our Rolling File Cart (FELLO-45081) and the 11x17 File Storage Box (#561003) are a few ways to store these folders effectively. We also carry an 11x17 Portfolio Case (#566680) that works well with these File Folders to organize your documents or art work while still allowing for great portability. Made from 10 pt./150 lb. index.

A five tabbed set of white dividers that comes with 1 set of five tabs and hole punches on the 11" side. Made from an extra thick 175 lb tag,which is better than industry standard which is generally from 90 lb to 110 lb card stock. The Tab Divider Labels (#152) that are sold separately are a great way to make these tabs look very clean and professional.

Go to www.xerox.com and search for approved printers.This product comes with 25 11" x 17" clear Transparencies with removable strips for printing. There are a few things to remember when printing transparencies. The first would be to fan all striped edges before loading. Also, for best results run one at a time by selecting one copy each time you print. Tip: to prevent static charge by stacking, remove each transparency as it exits the printer. ***Only recommended for use on laser printers.***

This product is made from a thick 1/8" Hardboard coated in polyurethane spray for extra resistance to damage. There is a low profile clip with two rubber traction grips and a retractable hanging hole attached. This clipboard is made extra long for very smooth and easy writing when at the bottom of the page.

Go to www.xerox.com and search for approved printers.This product comes with 100 11" x 17" clear Transparencies with removable strips for printing. There are a few things to remember when printing transparencies. The first would be to fan all striped edges before loading. Also, for best results run one at a time by selecting one copy each time you print. Tip: to prevent static charge by stacking, remove each transparency as it exits the printer. ***Only recommended for use on laser printers.***

The binder features a RF Sealed hinge into 2 layers of vinyl over thick chipboard. Heavy Duty Durable vinyl cover protects contents. It has extra long panels for product accessories and a 2" round ring riveted to the back panel for a standard 3-hole punch.

Great product for 3D Sketching, used by Artists, Engineers, and CAD Drafting. 100 sheets of Isometric Grid Paper. Rules are on 30° angles with 1/4" increments. Lines are drawn in Fade-Out Blue Ink and should disappear when copying on most copiers*. *Copy intensity may vary with copier manufacturers.

In the 11"x17" size, the Brown Kraft Envelopes are hard to come by. They are ideal for any document or bulky material that is this size, or even smaller, if the user needs a heavy-duty material to cover and carry their important items.

Our design allows larger pages to be easily inserted or removed from the clear overlay pockets. Clear overlay allows easy customization of Front Cover, Spine & Back Panel. The rings are mounted on the Back panel to allow papers to lie flat. The Heavy Duty Ring keeps pages securely in place. Angel-D ring holds more than standard round ring. Heavy Duty Durable vinyl cover protects contents.

If you're looking for a Heavy Duty sheet holding component, then you've found it. This product is designed to provide the best protection that you can receive from a sheet holder. Great for Restaurants, Coffee Shops, Bed & Breakfast, and many more.

A five tabbed set of manila dividers that comes with ten sets of five; tabs and hole punches on the 11" side. Made from an extra thick 100 lb. tag. The Tab Divider Labels (#152) that are sold separately are a great way to make these tabs look very clean and professional.

Made from Pressguard® Fiberboard material for a very durable and long lasting pressboard. A very versatile product that can be used in several different forms.

A unique product, ideal for presentations, controlled environments, and archiving projects. Binder panels are made from an Extra-Thick Acrylic Plastic. The non-flexible smooth panels keep a rigid and sturdy surface with a flat spine is made from the same material as the panels. There is a 1" nickel finished Slant-D Ring, riveted to the back panel and hinged on the 11" Side, with continuous aluminum piano hinges that are riveted to both panels and the spine.

This product is made from a thick 1/8" Hardboard. There is a 1" nickel finished Slant-D Ring riveted to the back panel and continuous aluminum piano hinges. Standard 3-hole punch ring spacing allows the user to use standard hole punching equipment.

CUSTOM 9"x18" Hardboard Clipboard with 6" Jumbo Board Clip on center of 8.5" side.

The 1" Angle-D ring binder features a QUAD-Creased hinge design, thick panels, and a superior quality ring mechanism. This product is ideally used for corporate presentations and record-keeping.

Custom Made Clipboard with 1" Straight-D Ring Mounted on 17" side of Acrylic Clipboard.

Black poly .1 thick, finished panels to be 18.5 x 25" with rounded corners. Aluminum hinge on each panel for screw post (screw post by others). 18" Long x 1.5" (.75" each side) aluminum hinge riveted to short side of panel. Paper sheet size: 18" x 24", bound on 18" side. 5 hole punched, at "0 is edge", 2", 5.5", 9", 12.5", 16"

Custom Made Clipboard with 1" Straight-D Ring Mounted on 17" side of Acrylic Clipboard.

Custom Made Clipboard with 1.5" Angle-D Ring Mounted on 17" side of Acrylic Clipboard.

This Custom Clipboard is made from an extra thick 3/16" Acrylic plastic. The board edges are bull-nosed and corner rounded to remove sharp edges. Classic 6" clip riveted to the center of the 12" side with a handy hanging hole manufactured on the clip. Made extra long for very smooth and easy writing when at the bottom of the page.

CUSTOM 14x20 Hardboard Clipboard with 2- 6" Jumbo Board Clips-One centered on 14" side & second clip centered 14" from edge & 90° from first clip. (see drawing)(invoice #104721)